Furnace & heating
AC repair
Heat pumps
Carrier
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Miami, FL
Furnace repair in Miami typically costs between $150 and $450 for most component failures, with the job usually completed the same day we diagnose it. Dalton Heating & Air Miami repairs all major furnace brands, gives you a written price before any work begins, and backs every repair with a full-year written guarantee. Call (850) 754-6042 and you’ll reach a live person, not a voicemail queue.
Miami’s heat means furnaces sit idle for months at a stretch. That idle time is harder on a furnace than a full heating season up north. Humidity seeps into the cabinet, wiring connections corrode, and blower motors seize from disuse. When that first cold front pushes through in December or January, we get a wave of calls from homeowners who flipped the thermostat to heat and got nothing but a click. We’re the crew that shows up inside the stated window, diagnoses the fault, and puts the price in writing before we touch a single component. For the broader picture on how furnaces and heat pumps work in South Florida’s climate, see our Heating & Furnace in Miami guide.
Marco Benitez runs this location. He’s held crews to The Garrison Standard since 2003, and the rule is simple: every furnace repair leaves with a written guarantee, a clean workspace, and a customer who knows exactly what was done and why.
Key Takeaways
- Most furnace repairs in Miami run $150 to $450, with the price in writing before work starts.
- Every repair includes a 365-Day Done Right Promise: if it fails within a year, we return at no charge.
- We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces.
- Technicians are background-checked, uniformed, and factory-trained on the brand they’re repairing.
- Calls are answered by a live person 24/7, including nights and weekends.
When You Need Furnace Repair
Furnaces rarely fail without warning. The signs show up weeks before the unit quits. Here’s what Miami homeowners should watch for:
- No heat at all. The thermostat calls for heat, the furnace doesn’t respond. In homes from Kendall to Westchester, this is often a failed igniter or a tripped limit switch from disuse.
- Short cycling. The furnace fires up, runs three to five minutes, shuts down, then repeats. That’s the system protecting itself from overheating, usually due to a dirty flame sensor or restricted airflow in older Coral Gables homes with original ductwork.
- Weak airflow from vents. The blower motor is failing or the filter is so clogged the system can’t push air. We see this a lot in Homestead where homeowners go a full year without changing the filter because the heat never runs.
- Unusual noises. A loud bang when the furnace starts points to delayed ignition. A constant rumble suggests the inducer motor bearings are worn. Either way, don’t ignore it: a cracked heat exchanger is a carbon monoxide risk and requires immediate attention.
- Burning smell that lingers. A brief dusty smell on first startup of the season is normal. A persistent acrid or gas odor is not. Shut the unit down and call us.
If you’re in Pinecrest or Palmetto Bay and the furnace is lighting but the house won’t warm, the issue could also be the thermostat or the gas valve. We check the whole chain, not just the obvious part.
Our Furnace Repair Process
You’ll know what’s happening at every step. That’s the point of The Garrison Code: arrive inside the window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
- You call, a person answers. You reach a live dispatcher 24 hours a day, not an answering service routing you to a callback. We take your address, your furnace brand and model if you know it, and describe the symptom you’re seeing.
- We show up inside the window. Your technician arrives in a marked Dalton truck, in uniform, with a badge. You know who’s coming before they arrive because the dispatcher tells you their name.
- Diagnostic walkthrough. The tech inspects the thermostat, furnace cabinet, blower compartment, burners, and exhaust. You get a plain-English explanation of what’s failed and what it does. Trade term first, then the translation: “Your flame sensor is carbon-fouled. It’s the safety device that confirms the burner actually lit. When it reads dirty, it shuts the gas valve.”
- Written price, no surprise line items. Before any repair, the tech hands you a written quote. That number doesn’t change at the door. If a second issue is found mid-repair, the tech stops, explains it, and gets your sign-off on the amended price before proceeding.
- Repair and verification. The part goes in, the system cycles, and the tech checks the temperature rise across the heat exchanger to confirm it’s running within spec. That’s the difference between a parts-swapper and a technician: we verify the fix, not just install it.
- Cleanup and written guarantee. The work area is left cleaner than we found it, and you get a written guarantee on the repair. Full year, no fine print. If the same repair fails in that window, the return visit is free.
Furnace Repair Pricing in Miami
Most furnace repairs in Miami run between $150 and $450, depending on the part. Here’s the range we quote on a typical call:
- Flame sensor cleaning or replacement: $150 to $250. The most common furnace fault in South Florida, caused by carbon buildup during months of disuse.
- Igniter replacement: $200 to $350. Hot surface igniters are ceramic and brittle. Humidity plus age cracks them.
- Limit switch or pressure switch replacement: $180 to $320. These safety switches fail slowly, causing intermittent shutdowns that get worse over weeks.
- Blower motor replacement: $350 to $650. The single most expensive common repair, because the motor itself is a significant part and the job includes balancing the new assembly.
- Gas valve replacement: $300 to $550. Less common, but critical when it fails. A sticking gas valve is a safety issue, not a comfort issue.
- Thermostat replacement or rewiring: $150 to $400, depending on the thermostat you choose and whether we’re running new low-voltage wire through finished walls.
What moves the price: the brand (Daikin and York parts have different supply chains in Miami than Goodman, which is everywhere), the age of the furnace, and whether the part is in our truck or needs a same-day run to our supplier. We carry common igniters, flame sensors, pressure switches, and capacitors for American Standard and Bryant units, which covers a large share of what we see in Miami-Dade.
The estimate is free. The diagnostic fee is waived when you approve the repair. You’ll have the final number in writing before the work starts, and it won’t change unless you approve a change in scope.
Furnace Repair in Miami: What Makes It Different Here
Miami breaks furnaces in ways Minneapolis doesn’t. Our humidity is relentless. Condensation forms inside the cabinet during the nine months the furnace sits dormant. That moisture corrodes wiring connections, rusts the burner assembly, and cakes the flame sensor with residue that prevents ignition on first startup. In neighborhoods like Coconut Grove and Coral Gables, older homes often have furnaces tucked into closets or attic spaces where airflow is restricted, which accelerates overheating and short cycling.
We also work around your schedule more than our own. Miami homeowners don’t think about the furnace until it doesn’t work, and when it doesn’t work, it’s usually during a three-day cold snap when every HVAC company in the county is booked out. Our live 24/7 dispatch means you can reach a real person at 11 p.m. on a Tuesday. That matters when the house won’t warm and you’ve got kids and a cold front pushing through Homestead.
FAQs – Furnace Repair
How much does furnace repair cost in Miami?
Most furnace repairs in Miami run $150 to $450, with blower motor replacements reaching up to $650. The price depends on the part that failed, the furnace brand, and your location in the county. Dalton Heating & Air gives you a written quote before any work starts, and the diagnostic fee is waived when you approve the repair. Call (850) 754-6042 for a free estimate.
Can you repair my furnace the same day?
Yes, in most cases. We stock common igniters, flame sensors, pressure switches, and capacitors on our trucks for Goodman, York, Bryant, and Daikin units, which covers the majority of same-day repairs in Miami-Dade. Less common parts may require a same-day run to our Miami supplier. Call us and we’ll tell you honestly whether we can complete the job today.
Is it cheaper to repair or replace a furnace in Miami?
For furnaces under 12 years old, repair is almost always the better financial move. A $300 igniter on an 8-year-old furnace buys you four or more additional years of service. For furnaces over 18 years old with a failed heat exchanger or compressor, replacement becomes the honest recommendation, because you’re looking at a $1,200+ repair on a unit nearing the end of its design life. We’ll give you both numbers in writing and let you decide.
What brands do you repair?
We’re factory-trained on nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If your furnace is one of these, we can diagnose and repair it. If it’s a less common brand, call us anyway and we’ll tell you over the phone whether we can help.
Do you offer a guarantee on furnace repairs?
Yes. Every furnace repair from Dalton Heating & Air is guaranteed in writing for a full year. If the repair fails within that 365-day window, we return at no charge. That’s the 365-Day Done Right Promise, and it’s included on every job, not sold as an add-on. If it’s not done right, we make it right.
Is my furnace dangerous if it’s making a banging noise?
A banging noise at startup, called delayed ignition, means gas is building up in the burner chamber before the igniter fires. That’s a safety concern, not a noise complaint. Shut the furnace down at the thermostat and call a professional. Do not continue cycling the unit. Dalton Heating & Air treats delayed ignition as a priority call: call (850) 754-6042 and we’ll get a technician out the same day.
Get Your Furnace Repaired Today
When the heat doesn’t come on in Miami, you don’t have time for a company that disappears or a price that changes at the door. Dalton Heating & Air Miami shows up when we say we will, hands you a written price before any work begins, and stands behind the repair for a full year. Marco Benitez and his crew serve the entire Miami metro area, from Kendall to Broward County’s southern edge. Call (850) 754-6042 now for a free estimate, or to get a technician scheduled today.
Written by Marco Benitez, Owner at Dalton Heating & Air Miami, serving Miami.